Typical Characteristic
| Characteristics | Index |
| Melting Point℃ | 90 – 100 |
| Viscosity CPS@140℃ | 5-10 |
| Penetration dmm @ 25 ℃ | 4-8 |
| Molecular Weight | 1000-1500 |
| Appearance | White powder/bead |
| Item | Basic information |
| HS CODE | 3404900090 |
| CAS No. | 9002-88-4 |
| Declaration elements | Polyethylene 100%, lubricant |
Application Direction
PVC stabilizer and products, hot melt adhesive, powder coating, filler masterbatch, asphalt modification.
Dosage and Usage
- PVC 0.5-1%, stabilizer 5-20%, filling masterbatch 5-8%, hot-melt adhesive 2-5%, road mark painting 1-3%, asphalt 1-3%;
- Usually, it can be added directly, and the pre dispersion treatment is carried out by high-speed mixing and stirring, and the appropriate temperature and time are controlled to obtain the best pre dispersion effect;
- The coating or ink shall be treated by dispersion or grinding, and then the wax powder shall be made into 20-30% wax slurry by using grinder or high shear dispersion equipment under appropriate process conditions, and then added according to the required
- For other industries, please refer to the processing characteristics of the industry to determine the best adding time and use
Product Packaging
The product is white powder, uniform in appearance and characteristics, in line with the standard. It is packed in 25 kg paper plastic composite bags or woven bags and transported in the form of pallets, 40 bags for each pallet, with a net weight of 1000 kg. It is packed in extended packages outside.
Security
Polyethylene and copolymers are considered non hazardous when exposure control is performed using industry accepted health practices. Please check our material safety data sheet for specific safety handling suggestions.
